Lee Outriggers

Sidewinder

lee sidewinder

bottom - Lee sidewinder

Sidewinder holder, silver,
w/ lay down mount - LEE SW9300

click to see prices

16' Silver Poles for Sidewinder - LEE AP3916XS

18-1/2' Silver Poles for Sidwinder - LEE AP3918

All poles are sectional and either bolt or screw together.

click to see prices

The Ultimate T-Top installation with convenient below the top operation. "Sidewinders" contain internal bushings to prevent the metal to metal contact, and allow smooth rotation. Fully locked in two positions, straight back running, and 80 degree out trolling.

The Holder is locked when the handle is either up or down, and rotates when the handle is either to the right or the left. "It will not slip!" The quick lay down makes clearing bridges a breeze. Simply support the pole with one hand, and pull down the spring-loaded collar on the lay down mount. Pole lays down and automatically locks in the down position. Reverse the procedure and the poles automatically lock in the up position. Same place, every time.

Poles are bright silver anodized with permanent guide rings, and spikes at the top.

Lee Junior Outrigger Holder

The Original Wishbone Style Outrigger Holder has been in production for more than 45 years. Setting the standard for the industry, our Junior outrigger holder has been often imitated but never equaled. Its ease of operation, adjustable fishing angle, ability to lay down for bridges, and small footprint makes it the ideal holder for a multitude of boats.

Durability was the watchword at its conception. You won't find plastic parts in this holder. Constructed of heavy-duty brass forgings, heavy wall brass pipe, and a stainless-steel main tube, it epitomizes strength and reliability. The three-point mounting system provides maximum strength and distributes the stress to the mounting surface over a wide area. This holder is mounted vertically, angled toward the stern; 30 to 35 degrees aft of the vertical is optimum.

2" Lee Junior - LEE OH226S click to see prices

19' Standard Silver Poles LEE AP3519 or Extra Strong Bright Silver Poles for the 2" Junior - LEE AP3519XS

click to see prices

Lee Junior wishbone

To deploy the rigger into the fishing position, simply open the gate and loosen the clamp housing. The clamp housing then slides down the main tube until you either lock it or it meets the stop collar for a preset fishing position. When the unit is lowered for passing under bridges, the gate stays closed and the clamp remains locked to the top of the main tube. The eye bolt is removed, thus separating the clamp housing from the wishbone. The main tube is then lowered into the supplied lay down hook.

lee side mount

Lee flush mount

click to see prices

Lee's Skiff Outrigger Holders

The side mount holders can be mounted on the side of a cabin or center console. The outriggers are rotated in and out by lifting the tube and turning to the desired position.

Side Mount 1-3/4"- LEE OH2018S

The Flush mount holders mount on the gunnels and operate the same way as the side mounts by lifting and turning the tubes.

Flush Mount 1-3/4" - LEE OH2016F

Lee Outrigger Poles
(All poles are sectional and either bolt or screw together so if you bend or break one, it can be replaced as a section, not the whole unit.)

15' Poles Bright Silver, Fits 1-1/4" holder - LEE AP3015

18-1/2' Poles Satin Silver, Fits 1-3/4" holder - LEE AP3018

18-1/2" Poles Bright Silver, Fits 1-3/4" holder - LEE AP3718

19' Extra Strong poles for 2" mounts, Bright Silver - LEE AP3519XS -

Lee Outriggers

click to see prices

Lee Rigging Kits

click to see prices

Lee Rigging Kits

Single rig, release clips included.

For 15' Skiff outriggers - LEE MC03115RK

Up to 25' overall length - LEE MC0322RK

Dock Upgrades

Engine Accessories